Ross Carbonite Series - Custom Controls; Custom Control Events

DescriptionLocationEvent
3. Click the Channel button and
select the channel you want to
send the command to.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the shot number you want
to recall from in the Shot field.
Recall a shot on the selected camera
as quickly as possible.
Devices >
Camera
Robotic Camera —
Recall Shot Fast
1. Click Recall Shot (Fast).
2. Click the Camera button and
select the device you want to
send the command to.
3. Click the Channel button and
select the channel you want to
send the command to.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the shot number you want
to recall from in the Shot field.
Store a shot on the selected camera.Devices >
Camera
Robotic Camera —
Store Shot
1. Click Store Shot.
2. Click the Camera button and
select the device you want to
send the command to.
3. Click the Channel button and
select the channel you want to
send the command to.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the shot number you want
to store to in the Shot field.
Turn the Roll Clip feature on or off for
the selected area.
Switcher >
Transition >
Roll Clip
Roll Clip
1. Click the ME button and select
the area that you want to
perform the event on.
2. Click the Value button and select
whether roll clip is on (On) or not
(Off).
Send the simulated custom control to
the selected device.
Devices >
RossTalk
RossTalk CC
1. Click CC.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the bank of the custom
control in the Bank field.
4. Enter the number of the custom
control in the Custom field.
DescriptionLocationEvent
Send the Clear Framebuffer command
for a framebuffer and layer to the
selected device.
Devices >
RossTalk
RossTalk Clear
1. Click Clear Channel.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the framebuffer that you
want to clear in the Channel
field.
4. Enter the layer that you want to
clear in the Layer field.
Send the Cue command for a specific
item and framebuffer to the selected
device.
Devices >
RossTalk
RossTalk — Cue
(item +
framebuffer)
1. Click Cue (2).
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the take item id of the item
you want to cue in the Take ID
field.
4. Enter the framebuffer that you
want to cue the item on in the
Channel field.
Send the Cue command for a specific
item and location to the selected
device.
Devices >
RossTalk
RossTalk — Cue
(item + framebuffer
+ layer)
1. Click Cue (3).
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the take item id of the item
you want to cue in the Take ID
field.
4. Enter the framebuffer that you
want to cue the item on in the
Channel field.
5. Enter the layer that you want to
cue the item on in the Layer
field.
Send the Cue command to the
selected device.
Devices >
RossTalk
RossTalk — Cue
Current
1. Click Cue.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
Send a manual RossTalk string to the
selected device.
Devices >
RossTalk
RossTalk Custom
Command
1. Click RossTalk CustomCmd.
2. Click the RossTalk Device
button and select the device you
want to send the RossTalk
command to.
3. Enter the RossTalk string in the
Custom Cmd field.
Send the Focus command for a
specific item to the selected device.
Devices >
RossTalk
RossTalk — Focus
1. Click Focus.
80 • Custom Controls — Carbonite Operation Manual (v13.0)