Ross CrossOver 12 Solo - Power Rating - Tallies; Power Consumption; Environmental Characteristics; Video Characteristics

Page 16 of 23 October, 2010 CrossOver 12 Solo Configuration Guide, v3.1
Power Rating – Tallies
Power Consumption
Environmental Characteristics
Video Characteristics
CrossOver 12 Solo
Input Voltage 24VAC (rms) / 40VDC
Maximum Current
170mA
Impedance
< 15 ohms
CrossOver 12 Solo
Consumption 24W 2A 12V
Input Voltage
100 - 120V~
220 - 240V~
47-63Hz
1.5A
CrossOver 12 Solo
Ambient Temperature Range 0 - 35°C (32 - 95°F)
Control Panel Cooling
Power Supply
CrossOver 12 Solo
Supported Video Formats
480i/59.94 (SD 525)
SMPTE 125M, SMPTE 259M
576i/50 (SD 625)
ITU-R BT.601-5, SMPTE 259M
720p/59.94
SMPTE 296M, SMPTE 292M
720p/50
SMPTE 296M, SMPTE 292M
1080i/50, 1080i/59.94
SMPTE 274M, SMPTE 292M
• 10 bit 4:2:2 component digital video and key processing.
• 4:3 and anamorphic 16:9 switchable aspect ratio where applicable.
• Contract Ross Video for additional format compatibility.
Video Inputs
CrossOver 12 Solo — Number of Inputs
12
Equalization (using Belden 1694 cable)
> 180m @ 1.5Gb/s
> 300m @ 270Mb/s
Impedance
75 ohm, terminating
Return Loss
> 20dB @ 1.5GHz
• All inputs are SMPTE-259M/292M serial digital non-looping.
• Inputs can be used for either key or video.
• The reference input is selectable, analog black for Standard Definition operation, and the
recommended tri-level sync for High Definition operation.