7
Assembly
This air compressor requires some minor assemble before it can be used.
Locate the accessory pack. It should contain :
1. Wheels and axle set
2. Rubber stopper
3. Air Filter
4. Oil Breather plug
5. A bottle of oil
• Fit the wheels to the unit using the axle kit
provided and insert the rubber stopper into the
spigot on the bottom of the tank.
• Fit the air filter to cylinder head of the compressor.
• Locate the plastic dust plug in the oil filler hole and remove it
to expose the oil filler hole.
2HP
2.5HP
Oil filler hole
To Next Page
Loading...
