Rosthal PTC-2702L - Usage; Function for Control Panel; Installation and Operation Instructions; Notices

INSTRUCTION MANUAL
CALEFACTOR DE TORRE
C/OSCILACION
PTC tower heater 2702
USAGE
INSTALLATION AND OPERATION INSTRUCTIONS
NOTICES
1. Please check before you use:
A: The heang element and electric wire cannot be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the fan heater on the flat place to avoid being toppled.
3. Funcon for control panel:
Checking and installaon before use:
1.Whether all parts and components are intact, whether the heang body is broken and broken, and
whether the power line is damaged
2.Check whether the parts in the packing box are consistent with the packing list in the manual
3. This product requires 110V ~ 50Hz power socket with current above 10A. Please use it aer
confirmaon.
1.Before use, check whether the power supply used is consistent with the mark on the nameplate of
the machine, and whether the power cord and plug are damaged.
2.Non full me personnel or unauthorized repairmen are not allowed to repair or report the machine
on their own, so as to avoid dange.
3.In order to ensure the use effect and product performance of this machine, do not use this machine
in plateau areas.
4.Turn off the power before pulling out the plug. Do not plug in and out the power plug with wet
hands to avoid electric shock.
5.It is forbidden to use in places where inflammable and explosive arcles are stored, so as to avoid
safety accidents such as fire and electric shock.
9
1.Connect the power supply, rotate the switch knob.
1.1“OFF”：Off.
1.2 ：Fan.
1.3 “I”：Low heat.
1.4 “II”：High heat.
1.5 “MIN”to“MAX”:It adjusted heang temperature.You can rotate the
knob to get your desired heang temperature.
2. The appliance lt or base leave the ground, power will cut off
automacally