Rotary R148 Pro - Fixtures Contained in the Packing; Assembly Procedures; Fitting the Mandrel on the Flange

INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 13 of 52
9.2 Fixtures contained in the packing
The packing case contains also the fixtures box.
Check that all the parts listed below are there (see
Fig. 5).
Code Description N.
GAR345 Wheels locking ring nut 1
VS129571492 External data gauge 1
VS999072 Carriages counterweight 1
VS1300A004 Weight pliers 1
VS129795330
Cones and centring bush-
ings kit
1
VS129580191 Protection cup 1
VS129580500 Casing for cup protection 1
GAR112
Off-road vehicle cone D.88-
132
1
Fig. 5
THE PRESSURE RING (FIG. 5
REF. A) MUST BE MOUNTED WITH
THE TEETH OR DISCHARGE SIDE
TOWARDS THE RING-NUT (SEE
FIG. 5).
9.3 Assembly procedures
9.3.1 Fitting the mandrel on the flange
Screw the mandrel with an Allen wrench (Fig. 6 ref. 1)
on the flange (Fig. 6 ref. 2).
Fig. 6
1
2
1297-M043-0