Rotary R148 Pro - Distance;Diameter Setting

INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 45 of 52
“LED-LIGHT” function can be ENABLED or DISABLED
Parameter 10*
LED LIGHT
VALUE 000 = Disabled
VALUE 001 = Enabled
“LASER BLADE” function can be ENABLED or DISABLED
Parameter 11*
(LASER BLADE)
VALUE 000 = Disabled
VALUE 001 = Enabled
“LASER DBL EDGE H12” function can be ENABLED or DISABLED
Parameter 12*
(LASER DBL EDGE H12)
VALUE 000 = Disabled
VALUE 001 = Enabled
“GUARD” Function can be ENABLED or DISABLED
Parameter 13
(GUARD)
VALUE 000 = Disabled
VALUE 001 = Enabled
“PAX PROGRAMS” Function can be ENABLED or DISABLED
Parameter 14
(PAX PROGRAMS)
VALUE 000 = Disabled
VALUE 001 = Enabled
“PROGRAMS CHANGE” Function can be ENABLED or DISABLED
Parameter 15*
(PROGRAMS CHANGE WITH
CALIPER)
VALUE 000 = Disabled
VALUE 001 = Enabled
20.5 Distance/diameter setting
The distance/diameter data gauge can be ENABLED or DISABLED (default setting: ENABLED)
Parameter 16
(DISTANCE/DIAMETER CALI-
PER)
VALUE 000 = Disabled
VALUE 001 = Enabled
The automatic diameter meter can be set with a diameter entry data
Parameter 17
(TYPE OF DIAMETER ENTRY)
VALUE 000 = diameter entry on rim/tyre
VALUE 001 = diameter entry with manual measurement
VALUE 002 = diameter entry with automatic detection (potentiom-
eter
The (OPTIONAL) automatic rim width meter= can be ENABLED or DISABLED (default setting: NOT ENABLED)
Parameter 18*
(EXTERNAL DATA GAUGE)
VALUE 0 = Disabled
VALUE 1 = Enabled
1297-M043-0