GB
Page 46 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
20.6 Weights display management
Parameter 19
(STEP)
CAR = 2 or 5 grams (0.1 or 0.25 ounces)
TRUCK = 20 or 50 grams (1 or 2.5 ounces)
Parameter 20
(DYN PROGRAM
LOWER LIMIT)
CAR = from 1 to 20 grams (from 0.05 to 1 ounce)
TRUCK = from 10 to 200 grams (from 0.5 to 10 ounces)
Parameter 21
(ALU PROGRAM
LOWER LIMIT)
CAR = from 1 to 20 grams (from 0.05 to 1 ounce)
TRUCK = from 10 to 200 grams (from 0.5 to 10 ounces)
20.7 Setting adhesive weight dimensions
To ensure the balancing machine precisely calculates the dimensions and total adhesive weights, set the height
(thickness) and width of the adhesive weights at your disposal (see Fig. 64).
Fig. 64
Adhesive weight height (H) is set with
Parameter 22
(HEIGHT ADHESIVE WEIGHT)
CAR = from 1 to 20 mm
TRUCK = from 1 to 30 mm
Adhesive weight width (L) is set with
Parameter 23
(WIDTH ADHESIVE WEIGHT)
CAR = from 5 to 50 mm
TRUCK = from 5 to 75 mm
It is also necessary to set the static threshold percentage used in the ECO-WEIGHT procedure with
Parameter 24*
(STATIC THRESHOLD %
IN ECO-WEIGHT)
VALUE from 0% to 200%
*= only for specific models
1297-M043-0
To Next Page
Loading...