Rotary R3 AC50 - SD CARD Update

15.2 SD CARD Update
Through the SW R
3
AC Update software you can update the contents of the SD CARD and, using
the latter, then update the charging station.
The software checks if there are updates available in Internet and allows you to download them.
You must have an active Internet connection.
Proceed as follows:
1. Turn off the equipment.
2. Go to the right hand side of the device.
3. Locate the SD CARD slot.
4. Gently press on the SD CARD to unlock it.
5. Remove the SD CARD.
6. Insert the SD CARD into the SD CARD READER.
7. Connect the SD CARD READER to a PC.
39