INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 27 of 57
13.5 Wheel balancing screen page descrip-
tion
After executing the spin of the wheel, the monitor dis-
plays a series of important information that helps the
operator in his operations and subsequent choices.
2P13 P2
28673
1 a b
c5 4
KEY
1 – Balancing mode
P1 – Weight to be fitted on rim outer side
P2 – Weight to be fitted on rim inner side
2 – Wheel placed to fit the weight on wheel outer
side (arrows both green)
3 – Wheel not placed to fit the weight on wheel
inner side (blue/black arrows)
4 – Wheel balancing suggestions
4a – MATCHING program
4b – SPOKES program (adhesive weights program
) or SPLIT program (clip weights program)
4c – STATIC Program
5 – N° user (if selected)
6 – Wheel repositioning button for weights fitting
7 – Display of the weight with the maximum reso-
lution of 1 g / 0,05 oz
7a – Display of the weights in grams
7b – Display of the weights in ounces/grams
8 – By pressing the button you will see the
following page where you can select one of the
programs suggested by the machine.
9 – Programs and measurements acquisition but-
tons
10 – Arrows indicating the weight fitting point with
distance-diameter caliper arm
Fig. 34
9
10
SPLIT
program
SPOKES program
MATCHING program
IF THE GUARD AND REPO-
SITIONING FUNCTION ARE
DISABLED, ON THE BUTTON
(Fig. 34 ref. 6) WILL BE DIS-
PLAYED THE ICON
,
WHICH ALLOWS THE WHEEL
SPIN WITHOUT RETURNING TO
THE PREVIOUS PAGE. WHEEL
POSITIONING FOR WEIGHTS
FITTING MUST BE CARRIED
OUT MANUALLY.
7a – Display of the weights in GRAMS
Set the unit of measurement for weights
display to GRAMS (see Par. 14.1 “Op-
tions menu”).
On the following screen page:
press the button to display the weight
with maximum resolution (1g) to be fitted on
the wheel, expressed in grams.
1297-M008-8
To Next Page
Loading...