BRP-Rotax
REPAIR MANUAL
Figure 4.30: Squish gap measurement
1 Solder 2
Vernier caliper
______________________________________________________
INSTALLATION OF SPARK PLUG
Instructions Proceed as follows to install the spark plug:
1. Screw in spark plug hand-tight and use tightening torque to tighten it with 27 Nm (20 ft.lb).
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
Chapter 4
Page 33
To Next Page
Loading...
