Rotax 912 ULS 3 - 7) External Alternator (Optional Extra)

page 116
May 01/2007
Effectivity: 912 Series
Edition 1 / Rev. 0
d04059
INSTALLATION MANUAL
BRP-Rotax
17.3.7) External alternator (optional extra)
See Fig. 76, 77 and 78.
- output: max. 600 W DC at 6000 r.p.m.
- voltage: 14,2 V – 14,8 V
- ambient temperature range: min. - 30 °C (-22 °F)
max. +90 °C (194 °F)
- weight: see section 8.
◆ NOTE: Voltage regulator is integrated in the alternator.
Feeding wiring to external alternator (1) located on the outside of
propeller gear (see Fig. 76).
- plus terminal (2): M6 screw suitable for ring terminal to DIN 46225
(tightening torque 4 Nm (35 in.lb))
- grounding: via engine block mount bracket
- control wiring (field circuit) (3) and warning lamp circuit (4): via
supplied standard plug (Sumitomo 6111-2568)
IG
L
B
Cyl. 1
Cyl. 3
Cyl. 2
Cyl. 4
Fig. 76
03199
1
XXX
Fig. 77
04902
2
3