page 128
May 01/2009
Effectivity: 912 Series
Edition 1 / Rev. 1
d04641
INSTALLATION MANUAL
BRP-Powertrain
21.2) Sensor for oil temperature
See Fig. 86 and 87
- location: oil pump housing
- marking (2): marked with "TO" (
temperature oil) on oil pump flange
■ CAUTION: To avoid any mix-up with indication wiring, mark this particular
cable also with "TO".
Fig. 86
TO
Fig. 87
12010080604020 140 160
1200
1000
(
Ω)
(°C)
800
600
400
200
0
- position of the temperature sensor (1) on the oil pump flange:
- connection of sensor wiring: spade terminal 6,3 x 0,8 to DIN 46247
- grounding: via engine block
- graph of sensor resistance over temperature
■ CAUTION: The graph resistance over temperature has been determined,
and is effective at the following conditions only.
ambient temperature: 20 °C (68 °F)
tolerance: ± 10%
BRP-Powertrain offers a non-certified temperature indicating instrument.
Refer to Illustrated Parts Catalog, latest issue.
▲ WARNING: Certification to the latest requirements such as FAR of EASA
has to be conducted by the aircraft manufacturer.
00226
00227
04869
Axes
x axis
mm
y axis
mm
z axis
mm
-115 46 -150
point of
support
1
2
To Next Page
Loading...
