Rotax 912 ULS 3 - Requirements on the Throttle Lever

Effectivity: 912 Series
Edition 1 / Rev. 0
d04057
page 97
May 01/2007
BRP-Rotax
INSTALLATION MANUAL
15.4) Requirements on the throttle lever
See Fig. 63.
Adjustable positive stops for idle- and full throttle position are of course required.
These stops have to be designed such to render adjustibility and to prevent
overload of the idle stop on the carburetor.
The sketch (Fig. 63) depicts a feasible arrangement.
Fig. 63
09137
Leerlauf
Idle
Startleistung
Take off power