Rotax 912 ULS 3 - Operating Media: Coolant; Coolant Selection and Mixture

Effectivity: 912 Serie BRP-Powertrain page 2-8
OM Edition 2 / Rev. 0 April 01/2010
d04674.fm
2.3) Operating media-Coolant
General note
Conventional
coolant
Conventional coolant mixed with water has the advantage of a
higher specific thermal capacity than water-less coolant.
Application When correctly applied, there is sufficient protection against vapor
bubble formation, freezing or thickening of the coolant within the
operating limits.
Use the coolant specified in the manufacturers documentation.
Mixture
* coolant component can be increased up to max. 65%.

WARNUN
G
NOTICE
Obey the latest edition of Service Instruction
SI-912-016 for the selection of the correct
coolant.

WARNUN
G
NOTICE
Obey the manufacturers instructions about
the coolant.
mixture ratio %
designation concentrate water
conventional e.g. BASF Glysantine
anticorrosion
50* 50
waterless e.g. EVANS NPG+ 100 0