Effectivity: 912 Serie BRP-Powertrain page 3-8
OM Edition 2 / Rev. 0 April 01/2010
d04675.fm
To observe! Reduction gear with shock absorber
WARNUN
NOTICE
Since the engine comprises a reduction gear
with shock absorber, take special care of the
following:
Step Procedure
1 To prevent impact load, start with throttle lever
in idle position or at the most up to 10% open.
2 For the same reason, wait for around 3 sec. af-
ter throttling back to partial load to reach con-
stant speed before re-acceleration.
3 For checking the two ignition circuits, only one
circuit may be switched off and on at a time.
To Next Page
Loading...
