Reference Modification no.
- 0 -
Page
212
Date
1997 02 01
Main
914 F
01479
13.6.2.3) Wiring harness
See Pic. 176.
The sensors are connected with the TCU via the wiring harness.
The easiest way to check function of turbo control components is by the
communication program. If this program is not at your disposal, the following
static checks of the sensors can be performed.
➪ For verification and error detection check all interconnections for continu-
ity and physical damage. See Pic. 176.
➪ Verify tight fit of all plug connections.
■ ATTENTION: Parts physically damaged or of not correct function have to
be exchanged without delay. Repair on one's own authority
is not allowed.
◆ NOTE: Pic. 176 contains a lot of information. Besides the wiring
designations, plugs allocation, cable length, the polarity of
the voltage supply to the single components is stated, too.
To Next Page
Loading...
