Effectivity: 915 i A Series
Edition 0 / Rev. 0
BRP-Rotax Page 7-15
December 01 2017
measure the correct air inlet temperature and the air pressure
right before the air filter.
Boost Pressure
Sensor (BPS)
The boost pressure sensor for reading of the boost pressure is
located right before the throttle near the overboost valve.
Manifold Air Pres-
sure Sensor (MAP)
The manifold air pressure sensor are located on the airbox.
Manifold Air Tem-
perature Sensor
(MAT)
The manifold air temperature sensor are located on the airbox.
To Next Page
Loading...
