Rotax MMH-912 Series - 2.2) Connections for instrumentation; 2.2.1) Cylinder head temperature display

75-00-00
page 4
May 01/2007
Effectivity 912/914 Series
Edition 1 / Rev. 0
d02625
BRP-Rotax
Maintenance Manual
2.2) Connections for instrumentation
■ CAUTION: Consult also the relevant sections on connections for instru-
mentation in the latest Installation Manual.
2.2.1) Cylinder head temperature display
There are temperature sensors screwed in to the cylinder heads of
cylinders 2 and 3. They monitor the material temperature of the head,
not the coolant temperature. The temperature sensor can be con-
nected to an indicating instrument and/or a temperature warning
switch.
Fig. 75-1
00125
6
1
2
3
4
5