Effectivity 914 Series
Edition 1 / Rev. 2
76-00-00
page 53
July 01/2008
d04355
BRP-Rotax
Maintenance Manual
3.1.2.9) Three-way solenoid valve
See Fig. 76-50
The 3-way solenoid valve (1) is installed on the engine
suspension frame or directly on airbox on newer engines.
Due to a modification a new 3-way solenoid valve has been
introduced. See SI-914-022, „Running Modifications“, latest
issue.
Accessories and attachment of the 3-way solenoid valve could
differ because of the possible variants of the airbox.
If the 3-way solenoid valve is fastened to the engine suspen-
sion frame, then not all parts of the retro-fitting kit are needed.
In addition the following parts are needed:
Variant 1: for airbox part no. 667167
◆
NOTE: all parts for variant 1 are included in retrofit kit
part no. 881040
parts requirement - retrofit kit part no. 881040
Fig New Qty/ Description Old Application
No.. p/n engine part no.
1 874313 1 3-way solenoid valve 874310 airbox
2 666010 1 adapter cable - wiring harness
3 951040 2 bracket - 3-way solenoid valve
4 840391 2 allen screw M6x14 - bracket
5 842040 2 lock nut M6 - bracket
6 866710 4 tie wraps - 3-way solenoid valve
08494
To Next Page
Loading...
