d02880.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
12-20-00
page 17
October 01/2009
6) Checking the V-belt tension
General note See Fig. 7.
In the case of configurations with additional auxiliary generator, inspect
attachment and V-belt tension.
Belt tension To adjust the belt tension:
Graphic Checking the V-belt tension
Fig. 7
00353
Step Procedure
1 Loosen the hex. screw (1) M10 and the two M8 allen screw (2) and (3).
2 Press the alternator upwards and tighten allen screw (3).
3 Then tighten hex. screw (1) M10 with tightening torque 40 Nm (30 ft.lb) and
allen screw M8 (2) with tightening torque 22 Nm (195 in.lb).
Part Function
1 Hex. screw M10
2, 3 Allen screw M8
1
3
2
To Next Page
Loading...
