d02880.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
12-20-00
page 25
October 01/2009
Graphic Replacing the coolant
Fig. 11 08533
5 If the coolant is being replaced with a different type, (conventional coolant,
waterless coolant) the cooling system must be flushed. See chap. 12-20-00
section: 9.3).
6 Refill newly mixed coolant into the expansion tank (highest point of the cooling
system). See chap. 12-10-00 section: 3.1).
7 Fit radiator cap.
8 NOTES: Run the engine briefly and replenish with clean coolant as
required.
Step Procedure
Part Function
1 Attachment screw (stainless steel)
2 Water pump
2
1
To Next Page
Loading...
