d02877.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
05-50-00
page 8
October 01/2009
- The whole engine must be inspected, repaired or overhauled in accor-
dance with the BRP-Powertrain instructions for continued airworthi-
ness.
- Inspect all systems for correct functioning.
- Detailed inspection of affected engine components.
Cylinder head A rise in cylinder head temperature above normal operating limits (see
Operators Manual) is a clear signal for a failure in the cooling system.
Camshaft bearings/Conrod bearings rather consequential damage wear (low oil
pressure)
The entire assembly must be dismantled, inspected and re-
paired.
Unintended engine stoppage by seizing
part possible cause
NOTICE
Cylinder head temperature too high
part possible cause
Cooling system not enough coolant
bad venting
Return valve is not working malfunction
Radiator contaminated
Radiator cap leaking
Pressure relief valve malfunction
Water pump malfunction
To Next Page
Loading...
