Rotax MML-912 - Oil Pressure below Minimum Value

d02877.fm
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 Series
Edition 2 / Rev. 0
05-50-00
page 15
October 01/2009
3.6) Oil pressure below minimum value
General note
NOTES: Any exceeding of the min. admissible oil pressure must be
entered by the pilot into the engine log book, stating dura-
tion extent of excessive pressure and pertinent details.
Graphic Overview and instruction
Fig. 4
07188
Minimum oil pres-
sure on the
ground
Oil pressure below minimum oil pressure on the ground
If noticed on ground, immediately stop the engine and determine the
cause.
- Inspect the complete lubrication system, trace cause and rectify. See
SI-912-005, latest issue.

WARNUNG
NOTICE
If the oil pressure falls below the minimum value, other
limits are often exceeded, e.g. the oil temperature.
Please observe the relevant instructions.
1 min.
Time
Oil pressure
Operating limit (minimum value)
(See Operators Manual 912 Series)
Proceed as
instructed in
table 5
Proceed as
instructed in table 6
0,5 bar
(7.25 psi)