Need help?Do you have a question about the Rotel RP-5300 and is the answer not in the manual?
A stand for storing the headshell when not in use.
Place the main unit on a stable, level surface.
Mount the turntable platter onto the main unit.
Place the rubber mat onto the turntable platter.
Attach the headshell to the tonearm.
Mount the counterweight onto the tonearm.
General| Speed | 33 1/3, 45 RPM |
|---|---|
| Weight | 6.5 kg |
| Motor | DC Servo Motor |
| Signal-to-Noise Ratio | 70 dB |
| Overhang | 15 mm |
| Platter | Aluminum die-cast |
| Tonearm | S-shaped Static Balance |
| Cartridge | MM type |
| Tonearm Type | S-shaped Static Balance |
| Output Voltage | 3.5 mV |
| Weight (kg) | 6.5 kg |
To Next Page
