Need help?Do you have a question about the Rotel RSX-1560 and is the answer not in the manual?
Power Output| power output at 8 ohms | 100 watts x 7/ch |
|---|---|
| power output at 4 ohms | 200 watts x 7/ch |
Power Consumption| power consumption (rating) | 500 watts |
|---|---|
| power consumption (idling) | 79 watts |
| power consumption (standby) | 3 watts |
Power Requirements| power requirements USA | 120 volts, 60 Hz |
|---|---|
| power requirements CE | 230 volts, 50 Hz |
Dimensions| dimensions (W x H x D) mm | 431 x 188 x 422 mm |
|---|---|
| dimensions (W x H x D) in. | 17 x 7 3/8 x 16 5/8 in. |
| front panel height | 4U / 177 mm / 7 in. |
Weight| weight (net) | 15.5 Kg / 38 lbs. |
|---|---|
| signal to noise ratio | 95 dB |
| S/N ratio | 45 dB |
Illustrates the wiring of speakers to the receiver's terminals.
Shows current system settings and provides access to menus.
Explains how to navigate the OSD menu system.
Explains connections for composite, S-Video, Component, and HDMI video signals.
Details digital video connections using HDMI for high-definition sources.
Explains how to connect to HDTVs via HDMI or Component Video.
Describes Component Video connections for high-definition signals.
Covers coaxial, optical, and HDMI audio input connections.
Details connections for up to seven speakers using binding posts.
Explains HDMI, Component, S-Video, and Composite connections for players.
Details connections for tuners using HDMI, Component, S-Video, Composite.
Covers analog and HDMI connections for high-resolution audio players.
Explains how to connect to HDTVs via HDMI and Component Video.
Configures speaker size (Large/Small/None) and subwoofer presence.
Step-by-step guide for connecting speakers to receiver terminals.
Details connecting a powered subwoofer to the receiver's preamp outputs.
Describes the front panel controls, display, and remote sensor.
Explains how to use the learning remote and its basic functions.
Lists and briefly describes front panel and remote controls.
How to select source inputs for listening or watching.
Step-by-step guide for choosing inputs via front panel controls.
Guide to selecting inputs using the remote control.
Allows direct selection of various surround sound modes.
How to turn the unit on/off using front panel, remote, and rear switch.
Explains how to manually select modes for specific playback needs.
Adjusting speaker levels for optimal balance and performance.
Operating remote zones using a remote and IR repeater.
Operating remote zones using main room controls.
Explains navigation buttons for the OSD menu system.
Displays current system settings and provides menu access.
Details options for assigning audio/video inputs and labels.
Configures options for direct analog inputs bypassing digital processing.
Explains speaker settings and bass management principles.
Configures speaker size (Large/Small/None) and subwoofer presence.
Details crossover settings and speaker mode overrides.
Uses test tones to set equal volume levels for all speakers.
Adjusts bass and treble response for speaker groups.
Provides access to various configuration and setup options.
Configures Pro Logic IIx modes (Cinema, Music, Game) and parameters.
Illustrates common speaker system configurations for bass management.
Allows custom speaker configuration for specific surround modes.
Sets master subwoofer crossover and level for surround modes.
Guide to calibrating speaker levels using a Sound Pressure Level meter.
Configures source inputs, labels, and default settings.
Configures DTS Neo:6 modes (Cinema, Music) for surround decoding.
Sets speaker delay based on distance for proper sound arrival.
Miscellaneous settings including record source, volume limits, and power modes.
Specifies video resolution and format for TV monitor outputs.
Sets HDMI audio processing (AMP or TV mode).
Selects the audio source for playback in remote zones.
Configures remote zone volume as Variable or Fixed.
Configures tuner, redirect, factory defaults, user defaults, and password.
Checks power cord, rear switch, and outlet for turn-on issues.
Checks muting, volume, preamp outputs, source connections, and HDMI audio mode.
Verifies digital input assignment, DVD bitstream, and output activation.
Checks power amp connections and speaker configuration settings.
Verifies TV connection, input assignment, and source compatibility.
Checks for active video signal, especially on PAL systems.
Checks video source selection and group delay settings.
Explains relay clicking and signal lock-on during input changes.
Checks remote batteries, IR sensor obstruction, and performs a reset.
Verifies zone setup and composite source connection.
Explains HDMI as an advanced digital connection for video and audio.
Compares HDMI capabilities with the older DVI standard.
Explains potential issues with HDCP and signal handshakes.
Lists technical details for amplifier power, distortion, and frequency response.
To Next Page
