Rothenberger ROMAX 4000 User Manual

ROMAX 4000
www.rothenberger.com
DE Bedienungsanleitung
EN Instructions for use
FR Instruction d’utilisation
ES Instrucciones de uso
IT Istruzioni d’uso
NL Gebruiksaanwijzing
PT Instruções de serviço
DA Brugsanvisning
SV Bruksanvisning
NO Bruksanvisning
FI Käyttöohje
PL Instrukcja obslugi
CZ Návod k používání
TR Kullanim kilavuzu
HU Kezelési útmutató
SL Navodilo za uporabo
HR Upute za uporabu
BG Инструкция за експлоатация
ET Kasutusjuhend läbi
LT Naudojimo instrukciją
LV Lietošanas pamācība
EL Οδηγίες χρήσεως
RU Инструкция по использованию
AR
CN 使用说明书
ROMAX 4000 Charger / Battery

Rothenberger ROMAX 4000 Specifications

General

Battery Voltage	18 V
Power Source	Battery
Type	Electro-hydraulic crimp tool
Cycle Time	Approximately 5 seconds
Crimping Range	Up to 110 mm

Summary

Device Operation and Controls

Changing Battery

Procedure for removing and replacing the device's battery pack.

Device Power Control

Instructions for activating the emergency stop and turning the device on/off.

Operating Positions

Guidance on different ergonomic positions for using the tool.

Tool Component Management

LED Status Indicators

Explanation of the different LED lights and their meanings.

Press Jaw Installation

Step-by-step guide on how to correctly insert the press jaw into the tool.

Detailed Operating Procedure

Preparation for Pressing

Steps to prepare the pipe and fitting before commencing the pressing operation.

Initiating the Pressing Cycle

How to start the pressing cycle using the tool's controls.

Pressing Process Stages

Visual representation of the distinct phases within the pressing cycle.

Accessories and Specifications

Battery Details

Technical specifications for the different battery models.

Charger Details

Technical specifications for the compatible battery chargers.