Rotolight accepts no responsibility for the operation or
functionality of third party transmitters.
NOTE: AEOS will flash once for the selected flash
duration when syncing in HSS, ensuring that the
complete frame is illuminated.
If AEOS detects a flash re-trigger event during a set
interval, it will automatically adjust the duration of
the flash to a shorter interval if required to avoid
damage occurring to the LEDs.
AEOS supports flash at any frame rate. Flash
output can be up to 250% of the nominal
maximum continuous light output (>14,250 lux at 3
feet or guide number 27).
To exit Flash mode
Click the left knob to return to MENU, alternatively
you can return to the basic operation (BRI / COL) by
pressing both control knobs together.
Lit with 1 x Rotolight
AEOS, Sony A6300,
Sony 10-18mm,
ISO 100, F4.0,
1/15th(tripod)
12
Photo by Rod Aaron Gammons
To Next Page
Loading...
