ROUSH F-150 - Exterior Badging and Graphics

6
*OFF ROAD AND CUSTOM SETTINGS ARE FOR OFF-ROAD USE ONLY”
“Dongle should only be installed for calibration purposes and not left in the vehicle permanently. Check and
ensure that the installation of the WiFi dongle does not impede the physical performance of any normal driving
activities. If a situation occurs in which the installed dongle protrudes too far into the under-dash area and
physically impedes driving functions, you must unplug the dongle from the OBD/J1962 Connector Port and
contact ROUSH
®
Performance for further instruction.”
ROUSH
®
Badging
Permanently mounted on the vehicle, these badges further validate the authenticity of your ROUSH
®
truck.
Fender, tailgate, and hood branding (locations vary by model) act as external identiers, while under the hood
and on the center console you can nd additional badging verifying the authenticity of this ROUSH
®
. Some of
these badges are unique to your build and are only available on a full ROUSH
®
vehicle purchase.
ROUSH
®
Graphics
Designed and produced from high-quality, OEM-grade automotive graphic materials, the strong matte black
nish further accents your ROUSH
®
truck. Refer to Section 3: Vehicle Care for specic maintenance directions.
ROUSH
®
Graphics may not be standard equipment on all models.
ROUSH
®
Front Windshield Banner
The front windshield banner boldly displays the ROUSH
®
name and announces the heritage of your truck.