24
Gearing
Brake Bias
Ride Height
Stock gearing for the LT is 19/58 lf you are running on a large, sweeping track and need more top
speed, a 20-tooth pinion is available. For shorter, technical tracks, a 18-tooth pinion is also available.
Set the truck on a flat surface and turn the threaded collars on the shocks evenly so both the front
and rear suspension arms are level.
Standard brake bias is 60% rear and 40%
front. If you need more chassis rotation
under braking adjust the linkage for less
front brake. If the truck is loose entering
turns under braking, adjust the linkage for
less rear brake or more front brake.
Tuning Reference
SECTION E
More brake
Rear brake
Less brake
Front brake
To Next Page
Loading...