Rover K Series 1.8 VVC User Manual

ENGINE K SERIES 1.8 VVC
Technical Academy
Page 12 of 28 01-34-RG-W-Ver:1
Figure 10
• With assistance, lift off the cylinder head from the cylinder block.
CAUTION: Do not rotate the crankshaft with the cylinder head removed.
• Fit cylinder liner clamps 18G 1736, securing the clamps with cylinder head bolts as
shown ensuring that the bolts used are those originally fitted in that location.
Figure 11
Support the cylinder head on suitable wooden blocks on the workbench to prevent
damage to valves that are open and the cylinder head face.
• Progressively undo and remove the camshaft carrier bolts.

Rover K Series 1.8 VVC Specifications

General

Brand	Rover
Model	K Series 1.8 VVC
Category	Engine
Language	English