GENERAL INFORMATION
VEHICLE IDENTIFICATION NUMBER 1
VEHICLE IDENTIFICATION NUMBER
Location
The Vehicle Identification Number (VIN) plate is
attached to the RH inner wing valance.
The VIN is also etched into the lower LH corners of
the windscreen and rear window.
Vehicle identification number
Example: SAXXNNAZEBD134455
S= Geographic area
A= Country
X= Manufacturer
XN= Marque/Model
N= Class
A= Body
Z= Engine
E= Transmission and Steering
B= Model change
D= Assembly plant
6 figures= Serial number
Paint and Trim colour codes
3-letter codes identifying the original Paint and Trim
colours are stamped on the VIN plate.
Paint
Example: H A M
H= Basic colour
A= Mark identifier
M= Colour/Shade name
Trim
Example: L P R
L= Basic colour
P= Mark identifier
R= Colour/Shade name
IDENTIFICATION NUMBER LOCATIONS
Engine number
Stamped on the front face of the cylinder block
adjacent to the alternator.
Gearbox number
Shown on a label attached to the upper face of the
final drive housing.
Body number
The body number is stamped on a plate fixed to the
bonnet locking platform.
To Next Page
Loading...
