AMENDMENT INSTRUCTION SHEET
MINI WORKSHOP MANUAL
Publication Number RCL 0193ENG - 2nd Edition
Amendment Number: XN-001/97ENG Date: 12/96
To ensure that this manual is kept up to date and that a record of amendments to this manual is available, an
Amendment Instruction Sheet will be issued with each set of revised pages.
• The Title page of the Manual is re-issued, and the Part No. has been raised to the next edition. Except for the
Contents pages, all revised and new pages have the issue date at the foot of each page, together with an
indication of whether the pages are revised or new.
• This Amendment Instruction Sheet must be inserted at the front of the manual to indicate that the amendment
has been incorporated. Do not discard previous Amendment Instruction sheets.
• Your manual is only complete to this issue providing all prior Amendments are included.
• The filing instructions give section and page numbers affected. Additional pages or complete new sections may
be issued, insert the pages as instructed.
FILING INSTRUCTIONS
Section Discard Existing
Pages
Insert New Pages Reason for Amendment
Introduction Title Page Title Page Introduction of new sections. Part number
raised to next edition.
Information Contents Page Contents Page Corrections to existing information and
addition of new torque figures.
General data,1 General data,1
Torque wrench
settings, 1&3
Torque wrench
settings, 1-5
Engine Contents Page Contents Page Corrections to existing information and
addition of new repair procedures.
Repairs, 33-37 Repairs, 33-41
Emission Control Description and
operation, 1
Description and
operation, 1
Corrections to existing information.
Repairs, 1 Repairs, 1
Engine Management
System - MEMS
Contents Page Contents Page Corrections to existing information.
Description and
operation, 1-11
Description and
operation, 1-11
Fuel Delivery System Contents Page Contents Page Corrections to existing information and
introduction of Adjustments section.
- Adjustments
Repairs, 1 Repairs, 1
Cooling System Repairs, 3 Repairs, 3 Corrections to existing information.
Manifold & Exhaust
Systems
Description and
operation, 3
Description and
operation, 3
Corrections to existing information.
Clutch Contents page Contents Page Corrections to existing information and
addition of new repair procedures.
Adjustments, 1 Adjustments, 1
Repairs, 1-7 Repairs,1-11
Continued.....
To Next Page
Loading...
