Need help?Do you have a question about the Rowenta DW5280U1 and is the answer not in the manual?
General| Power | 1700 Watts |
|---|---|
| Vertical Steam | Yes |
| Self-Cleaning | Yes |
| Anti-Drip System | Yes |
| Soleplate Material | Stainless Steel |
| Auto Shut-off | Yes |
| Anti-Calc | Yes |
| Water Tank Capacity | 300 ml |
| Steam Output | 40 g/min |
Details pilot light, auto-off indicator, and steam lever functions.
Explains the burst of steam and spray button operations.
Covers the filling inlet, self-clean, anti-drip, and anti-calc valve.
Describes the temperature control dial and the iron's precision tip.
Instruction to remove the protective cover from the soleplate.
Guide to positioning the steam lever for initial use.
Step to open the water tank filling port.
Instructions on how to fill the water tank correctly.
Guidance on when to stop filling the water tank.
Instruction to secure the water tank filling port after use.
Correct procedure for placing the iron on its heel and plugging it in.
How to adjust the thermostat knob to the desired fabric setting.
Explains the pilot light's role in indicating heating and readiness.
Details the time intervals for automatic shut-off based on iron position.
How to set the steam lever for dry ironing mode.
Instruction to press the spray button for water mist.
Setting the thermostat to the maximum level for steam boost.
How to activate the burst of steam function.
Recommended waiting time between steam burst activations.
Setting the thermostat to maximum for vertical steaming.
Proper technique for vertical steam application.
Recommended pause between vertical steam applications.
Specifies the correct distance from fabric for vertical steaming.
Safety advice against steaming oneself or others.
Correct placement of the iron when connected to power.
Safety warning about leaving the iron on the soleplate when unplugged.
Instruction to let the iron cool for one hour before cleaning.
Method for cleaning the soleplate with a damp cloth or sponge.
Advises against detergents and abrasive materials.
Warning not to pour water directly onto the iron.
Step to disconnect the iron from the power outlet.
Setting the steam lever to the stop position for storage.
Letting the iron cool down for an hour before storing.
Instructions to empty the water tank before storing the iron.
Instruction to disconnect the iron from the power supply.
Ensuring the iron has cooled down before maintenance.
Procedure to empty the water tank before cleaning the valve.
Setting the steam lever to the correct position for self-cleaning.
Filling the water tank to the maximum level for the cycle.
Connecting the iron to the power outlet to start self-cleaning.
To Next Page