1
1 Spray nozzle
2 Filling inlet
(with slide-button opening)
3 Eco steam system
a Dry ironing
b ECO position
C
BOOST position
4 Self Clean
5 Spray button
6 Shot of steam button
7 Cord
8 Handle
9 Thermostat control light
10 Temperature control dial
11 Water tank
12 Maximum water level indicator
13 Soleplate
14
Auto-Off*
15
High Precision Tip
DESCRIPTION
IMPORTANT SAFETY
INSTRUCTIONS
When using an iron, basic precautions should always be followed, in-
cluding the following:
Read all instructions before using
1. Only use an iron for its intended use.
2. To avoid the risk of electric shock, do not immerse the iron in water
or other liquids.
3. Always turn the iron OFF before plugging or unplugging the iron from
the electrical outlet. Never pull on the cord to disconnect the iron from
the electrical outlet; instead, grasp the plug and pull on the plug to dis-
connect the iron.
4. Do not let the cord touch hot surfaces. Let the iron cool completely
before putting the iron away. Coil the cord loosely around the iron when
storing.
5. Always disconnect the iron from the electrical outlet before filling the
iron with water, emptying the water from the iron, and when the iron is
not in use.
6. Do not operate the iron with a damaged cord or in the event the iron
has been dropped or damaged. To avoid the risk of electric shock, do
not disassemble the iron. Take it to a qualified serviceman for exami-
nation and repair. Incorrect assembly might result in a risk of electric
shock when the iron is used after reassembly.
7. Close supervision is required for any appliance used by or near chil-
dren. Do not leave the iron unattended while the iron is connected or
on an ironing board.
E
N
FR
ES
To Next Page
Loading...
