EN
To use the remote control, point the transmitter diode in the direction of the fan’s infra-red receiver and press on the required button.
Make sure that there aren’t any obstacles between the transmitter diode and the receiver.
Remote control power supply:
The remote control uses 2 x 1.5 V type AAA or LR03 alkaline batteries, which are not included.
Place the batteries in their compartment making sure that you put them in with the positive and negative ends the right way round as shown in the
battery compartment.
IMPORTANT: We advise you to unplug your appliance when it is not in use.
When storing the appliance for a longer period of time, please remove the batteries from the remote control.
7 - CLEANING
• Your appliance must be unplug-
ged before proceeding with any
cleaning work.
• You can clean it with a slightly
damp cloth.
• IMPORTANT: Never use abrasive
products which might damage
the appearance of your appliance.
8 - STORAGE
• When you are not using your appliance, store it in a dry place.
9 - IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself. A poorly repaired appliance may be
dangerous for the user.
• If the appliance ceases to operate or is damaged in any way, contact one of our
authorised service centres.
10 - ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
This appliance uses batteries: help us look after the environment, by not throwing away your used batteries. Instead, bring them to anyone of the
special battery collection points. Do not throw them away with your household waste.
To Previous Page
Loading...
