Royal Enfield Himalayan 2018

Questions and Answers

M
Michael FryeJul 26, 2025
How to fix a Royal Enfield Himalayan 2018 Motorcycle that does not start?
- S
  Stephanie MartinJul 26, 2025
  If your Royal Enfield Motorcycle engine won't start, ensure the ignition/engine stop switch is in the ‘ON’ position. Also, check the fuel tank and add fuel if it's very low or empty. If the lights or horn are very dim, or electricals are not working it indicates a weak/discharged or completely dead battery, consider replacing the battery. If the electricals are not working, it may also be due to a blown fuse; replace the appropriate fuse. If the fuse blows again, it's best to contact an Authorised Service Center.
R
renee11Aug 2, 2025
What to do if Royal Enfield Himalayan 2018 Motorcycle engine cranks but doesn't start?
- R
  Robert ThomasAug 2, 2025
  If the engine of your Royal Enfield Motorcycle cranks but doesn't start, check if the gear is engaged and the side stand is down. If the ambient temperature is low, use the Manual Bi-starter. If these steps don't work, the idling RPM might be set too low or disturbed. Contact an Authorised Service Center for resetting the Idling RPM.
P
plarsonAug 9, 2025
Why does my Royal Enfield Himalayan 2018 Motorcycle have poor pickup?
- H
  hrothAug 9, 2025
  If your Royal Enfield Motorcycle has poor pickup, and the engine RPM raises disproportionately to the motorcycle speed, the clutch is likely slipping. Check for a sticky clutch or a clutch without any free play. Another potential cause is a rear chain that's excessively loose, causing it to slip on the sprocket. Adjust the rear chain to the correct tension. If the MIL Lamp is glowing, contact Authorised Service Center.
K
Kristen HughesAug 18, 2025
Why does my Royal Enfield Himalayan 2018 Motorcycle engine misfire and run erratically?
- J
  Joseph RayAug 18, 2025
  If your Royal Enfield Motorcycle engine is misfiring, running erratically, or stopping, it could be due to adulterated fuel or water in the fuel. Drain the entire fuel tank and refill with fresh fuel from a reputable filling station. It might also be happening because the motorcycle was driven in low gear, at high RPM, or in crowded places for a long time, causing excessive engine temperature. Switch ‘OFF’ the engine and allow it to cool down. If the MIL Lamp is glowing, contact an Authorised Service Center.
D
DONATOMar 19, 2026
Bateria adecuada para la himalayan 411 de 2018

Summary

FOREWORD

TALK TO ROYAL ENFIELD

Encourages owner feedback and community engagement.

NOTICE

Disclaimer

Key disclaimers regarding manual content and motorcycle specifications.

PERSONAL & MOTORCYCLE INFORMATION

TECHNICAL SPECIFICATIONS - ENGINE

ENGINE

Core engine parameters like type, bore, stroke, displacement.

TECHNICAL SPECIFICATIONS - IGNITION & TRANSMISSION

IGNITION SYSTEM

Details about the motorcycle's ignition system.

TRANSMISSION

Specifications for the motorcycle's gearbox and drive.

TECHNICAL SPECIFICATIONS - CHASSIS & BRAKES

CHASSIS

Specifications related to the motorcycle's frame and suspension.

Brakes & Tyre Specifications

Details on brake types, sizes, and tyre specifications.

Tyre Pressures

Recommended tyre pressure settings.

RECOMMENDED LUBRICANTS

SAFETY DEFINITIONS

MOTORCYCLE IDENTIFICATION NUMBERS

LOCATION OF KEY PARTS

OPERATION OF CONTROLS

STEERING LOCK

Procedure for locking and unlocking the steering.

OPERATION OF CONTROLS

FUEL TANK CAP

Procedure for opening and closing the fuel tank cap.

OPERATION OF CONTROLS

IGNITION SWITCH

How to use the ignition switch and its modes.

OPERATION OF CONTROLS

ENGINE STOP SWITCH

Operation of the engine stop switch.

E-START SWITCH

How to use the electric starter button.

OPERATION OF CONTROLS

DIMMER SWITCH

How to switch between high and low beam.

TURN SIGNAL SWITCH

Operation of turn signal indicators.

OPERATION OF CONTROLS

INSTRUMENT CLUSTER

Overview of the motorcycle's instrument display.

OPERATION OF CONTROLS

A. MAIN LCD

Explanation of indicators on the main LCD screen.

OPERATION OF CONTROLS

CLOCK

How to set and display the time.

OPERATION OF CONTROLS

CLOCK SETTING

Step-by-step guide to setting the clock.

OPERATION OF CONTROLS

AMBIENT TEMPERATURE INDICATION

How to read and interpret ambient temperature.

OPERATION OF CONTROLS

TEMPERATURE UNIT CHANGEOVER

How to switch between Celsius and Fahrenheit.

OPERATION OF CONTROLS

SERVICE REMINDER

Explanation of the service reminder and its reset.

OPERATION OF CONTROLS

ODOMETER

Display of cumulative kilometers covered.

TRIP A;B & AVG SPEED A;B

Tracking distance and average speed.

OPERATION OF CONTROLS

TRIP “F” MODE

Functionality for measuring distance based on fuel level.

OPERATION OF CONTROLS

SIDE STAND INDICATOR

Indicates when the side stand is extended.

OPERATION OF CONTROLS

GEAR POSITION INDICATION

Shows the current gear selected.

C. TELL TALES

Indicator lights for turn signals, neutral, and high beam.

OPERATION OF CONTROLS

Low Battery Indication

Warning for low battery voltage.

High Beam Indication

Indicates when the high beam is active.

EMS Malfunction Indication

Warning for engine management system issues.

OPERATION OF CONTROLS

D. TACHO METER

Displays engine RPM.

OPERATION OF CONTROLS

G. COMPASS LCD

Provides navigation direction.

OPERATION OF CONTROLS

H. FUEL GAUGE

Indicates the current fuel level in the tank.

PRE OPERATIONAL CHECKS

Pre-ride checks 1-10

Checks for fuel, tyres, chain, oil, cables, brakes, and controls.

PRE OPERATIONAL CHECKS

Pre-ride checks 11-16

Checks for lamps, nuts, spokes, fasteners, engine idling, and leaks.

SAFE & HAPPY RIDING

Safe riding practices

Advice on refueling, rules of the road, and speed.

SAFE & HAPPY RIDING

Riding advice

Tips on visibility, signalling, and avoiding impairment.

SAFE & HAPPY RIDING

RIDING GEAR

Essential protective clothing and helmet requirements.

SAFE & HAPPY RIDING

SITTING POSTURE

Correct posture for stable and safe riding.

BRAKING

Techniques for effective and safe braking.

SAFE & HAPPY RIDING

Brake Warnings

Precautions regarding brake effort and pad wear.

CARGO & ACCESSORIES

LOADING

Proper methods for strapping and distributing cargo.

CARGO & ACCESSORIES

CAUTION & WARNINGS

Safety notes on exhaust gases, towing, and load limits.

RULES OF THE ROAD

Road Surface Conditions

Advice on riding safely on dry, oily, icy, or wet surfaces.

RULES OF THE ROAD

Traffic Signals & Intersections

Rules for navigating intersections and traffic signals.

RULES OF THE ROAD

SIDE VIEW MIRRORS

Understanding and adjusting the motorcycle's mirrors.

RUNNING IN PERIOD

Break-in guidelines

Recommendations for the first 2000 km of riding.

RUNNING IN PERIOD

Speed Limits

Recommended speed limits by gear for the first 2000 km.

STARTING

Starting Procedure

Steps to start the engine, including neutral and ignition.

STARTING

Using Starter & Clutch

How to engage the starter button with the clutch lever.

STARTING

Manual Bi-Starter & Warm-up

Using the choke and warming the engine.

GEAR SHIFTING, RIDING & STOPPING

GEAR SHIFT PATTERN

Understanding the gear sequence and clutch operation.

GEAR SHIFTING, RIDING & STOPPING

Riding on Slopes

Advice for climbing hills and descending slopes.

PARKING

PARKING MOTORCYCLE ON SIDE STAND

Steps for parking securely on the side stand.

PERIODICAL MAINTENANCE

Maintenance Schedule (Engine Oil & Filter)

Intervals for checking and replacing engine oil and filter.

PERIODICAL MAINTENANCE

Maintenance Schedule (Other Components)

Intervals for servicing various engine and fuel system parts.

PERIODICAL MAINTENANCE

Maintenance Schedule (Filters & Cables)

Intervals for servicing air filter, cables, and hoses.

PERIODICAL MAINTENANCE

Maintenance Schedule (Clutch & Battery)

Intervals for clutch free play, steering bearings, and battery checks.

PERIODICAL MAINTENANCE

Maintenance Schedule (Brakes)

Intervals for checking brake fluid, hoses, and pads.

PERIODICAL MAINTENANCE

Maintenance Schedule (Suspension & Chain)

Intervals for servicing suspension, chain, and stands.

TOOLS KIT

MINOR MAINTENANCE TIPS

HAND LEVER & SIDE STAND PIVOTS

Lubrication and cleaning of pivots.

MINOR MAINTENANCE TIPS

CENTRE STAND PIVOT LUBRICATION

Lubricating the centre stand pivot.

MINOR MAINTENANCE TIPS

DRIVE CHAIN & OIL LEVEL INSPECTION

Cleaning chain and checking engine oil level.

MINOR MAINTENANCE TIPS

SPARK PLUG & BRAKE FLUID

Spark plug cleaning/adjustment and brake fluid checks.

MINOR MAINTENANCE TIPS

INSPECTION OF TYRES AND RIMS

Checking tyres for wear, damage, and embedded objects.

MINOR MAINTENANCE TIPS

TYRE PRESSURE & WHEEL SAFETY

Correct tyre inflation and wheel handling precautions.

MINOR MAINTENANCE TIPS

FRONT WHEEL REMOVAL

Step-by-step guide for removing the front wheel.

MINOR MAINTENANCE TIPS

FRONT WHEEL REASSEMBLY

Steps for correctly reassembling the front wheel.

MINOR MAINTENANCE TIPS

REAR WHEEL REMOVAL

Step-by-step guide for removing the rear wheel.

MINOR MAINTENANCE TIPS

REAR WHEEL REASSEMBLY

Steps for correctly reassembling the rear wheel.

MINOR MAINTENANCE TIPS

CAUTIONS ON REASSEMBLY

Precautions for spindle insertion and chain tension adjustment.

MINOR MAINTENANCE TIPS

DRIVE CHAIN TENSION ADJUSTMENT

How to adjust the drive chain free play.

MINOR MAINTENANCE TIPS

WHEEL ALIGNMENT & FINAL CHECKS

Ensuring wheel alignment and tightening nuts.

MINOR MAINTENANCE TIPS

CLUTCH LEVER FREE PLAY ADJUSTMENT

How to adjust clutch lever free play.

MINOR MAINTENANCE TIPS

REMOVAL OF BATTERY FROM MOTORCYCLE

Steps to safely remove the motorcycle battery.

MINOR MAINTENANCE TIPS

REASSEMBLY OF BATTERY ON MOTORCYCLE

Steps for correctly reinstalling the motorcycle battery.

MINOR MAINTENANCE TIPS

HEADLAMP BULB DISMANTLING

Procedure for removing the headlamp bulb.

MINOR MAINTENANCE TIPS

HEADLAMP BULB HANDLING & REMOVAL

Precautions for handling bulbs and removing them.

MINOR MAINTENANCE TIPS

HEAD LAMP BULB REPLACEMENT

Steps for installing a new headlamp bulb.

MINOR MAINTENANCE TIPS

TAIL LAMP

Information on replacing the tail lamp assembly.

MINOR MAINTENANCE TIPS

TRAFFICATOR BULB REPLACEMENT

Steps for replacing trafficator bulbs.

MINOR MAINTENANCE TIPS

FUSE & CARRIER

Locating and replacing fuses in the carrier.

MINOR MAINTENANCE TIPS

BLADE FUSE USAGE LIST

List of fuse IDs, functions, and ratings.

MINOR MAINTENANCE TIPS

WINDSHIELD CLEANING

How to clean the windshield safely.

LONG TRIP PRECAUTIONS

CHECKS PRIOR TO LONG JOURNEY

Pre-trip checks for the motorcycle.

LONG TRIP PRECAUTIONS

ITEMS TO BE CARRIED

SHOCK ABSORBER

SPRING PRELOAD & SHOCK ABSORBER SETTINGS

How to increase or decrease spring preload.

OFF ROADING

AFTER OFF ROADING

Post-off-road checks for tyres, brakes, and rims.

OFF ROADING

POST OFF-ROAD ADJUSTMENTS

Correcting suspension and cleaning air filter.

WASHING PROCEDURE

PRECAUTIONS

Steps to protect parts from water entry during washing.

WASHING PROCEDURE

AFTER WASHING

Drying, lubricating, and polishing after washing.

WASHING PROCEDURE

STEERING T STEM MOUNTING AREA

Cleaning guidelines for the steering stem area.

WASHING PROCEDURE

OIL COOLER & INSTRUMENT CLUSTER

Cleaning guidelines for oil cooler fins and instrument cluster.

WASHING PROCEDURE

STICKERS ON MUDGUARDS

Care instructions for stickers on mudguards.

STORAGE PRECAUTIONS

TROUBLE SHOOTING

ENGINE DOES NOT START - CHECKS

Troubleshooting steps for ignition, fuel, battery, and lights.

TROUBLE SHOOTING

ENGINE CRANKING; STALLING ISSUES

Diagnosing engine crank but no start or stalling after throttle closure.

TROUBLE SHOOTING

ENGINE MISFIRES & POOR PICKUP

Resolving issues with misfires, erratic running, and low pickup.

WARRANTY TERMS & CONDITIONS

WARRANTY EXCLUSIONS

Conditions not covered by the warranty.

EMISSION WARRANTY

WARRANTY APPLICATION CONDITIONS

Requirements for the customer to be eligible for the warranty.

EMISSION WARRANTY

WARRANTY SHALL NOT APPLY IF

Situations that void the emission warranty.

SERVICE MAINTENANCE RECORD

Royal Enfield Himalayan 2018 Specifications

General

Displacement	411 cc
Bore x Stroke	78 mm x 86 mm
Compression Ratio	9.5:1
Maximum Power	24.5 bhp @ 6500 rpm
Maximum Torque	32 Nm @ 4250 rpm
Ignition System	Digital electronic ignition
Clutch	Wet, Multi-plate
Frame Type	Half-duplex split cradle frame
Front Brake	300 mm disc, 2-piston floating caliper
Rear Brake	240 mm disc, single piston floating caliper
Front Tyre	90/90 - 21
Rear Tyre	120/90 - 17
Length	2190 mm
Width	840 mm
Height	1360 mm
Seat Height	800 mm
Ground Clearance	220 mm
Wheelbase	1465 mm
Kerb Weight	194 kg
Engine Type	Single Cylinder, 4-Stroke, SOHC
Transmission	5-speed
Front Suspension	Telescopic, 41 mm forks
Rear Suspension	Monoshock
ABS	Dual Channel ABS
Fuel Tank Capacity	15 L