Royal Prestige JUICE EXTRACTOR - Page 7

7
Note: The Juice Extractor will not operate if
parts are not assembled properly.
STEP 2
Top-set and Base Assembly
Place the top-set on top of the base.
Align the arrow ▼ on the Hopper with
the arrow (open) on the base.
4
98
HOW TO ASSEMBLE
The juicing screw needs to be locked in
place in order to close the drum lid.
Note |
STEP 1
Top-set Assembly
STEP 2
Top-set and Body Assembly
Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
Place the drum lid on to the juicing bowl
aligning the red dot
●
on the drum lid with
the red dot
●
on the juicing bowl. Turn
clockwise to close, aligning the red dot
●
on the drum lid with the close mark
.
Check Before
Operating
• Wash the parts before rst use.
• Ensure that the silicone ring is assembled properly.
2
3
4
6
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Place the drum lid on the juicing bowl.
Align the down arrow
▼
on the drum
lid with the
OPEN mark on the body
and turn to the
CLOSE position.
Open/Close mark on the top-set.
5
For easy assembly hold the drum lid
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
TIP
Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
●
on
the strainer is aligned with the red dot
●
on the juicing bowl.
1
Note | The juicer will not operate if the down arrow
▼
on the drum lid is not completely aligned
with the
CLOSE mark on the body.
Open
Close
Open/Close mark on the top-set.
98
HOW TO ASSEMBLE
The juicing screw needs to be locked in
place in order to close the drum lid.
Note |
STEP 1
Top-set Assembly
STEP 2
Top-set and Body Assembly
Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
Place the drum lid on to the juicing bowl
aligning the red dot
●
on the drum lid with
the red dot
●
on the juicing bowl. Turn
clockwise to close, aligning the red dot
●
on the drum lid with the close mark .
Check Before
Operating
• Wash the parts before rst use.
• Ensure that the silicone ring is assembled properly.
2
3
4
6
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Place the drum lid on the juicing bowl.
Align the down arrow
▼
on the drum
lid with the
OPEN mark on the body
and turn to the
CLOSE position.
Open/Close mark on the top-set.
5
For easy assembly hold the drum lid
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
TIP
Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
●
on
the strainer is aligned with the red dot
●
on the juicing bowl.
1
Note | The juicer will not operate if the down arrow
▼
on the drum lid is not completely aligned
with the CLOSE mark on the body.
Open
Close
For easy assembly hold the Hopper with
both hands and turn clockwise as shown
in the illustration.
TIP
5
Place the pulp cup under the pulp spout and
place the juice cup under the juice spout as
shown in the illustration. Pusher is optional.
98
HOW TO ASSEMBLE
The juicing screw needs to be locked in
place in order to close the drum lid.
Note |
STEP 1
Top-set Assembly
STEP 2
Top-set and Body Assembly
Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
Place the drum lid on to the juicing bowl
aligning the red dot
●
on the drum lid with
the red dot
●
on the juicing bowl. Turn
clockwise to close, aligning the red dot
●
on the drum lid with the close mark .
Check Before
Operating
• Wash the parts before rst use.
• Ensure that the silicone ring is assembled properly.
2
3
4
6
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Place the drum lid on the juicing bowl.
Align the down arrow
▼
on the drum
lid with the
OPEN mark on the body
and turn to the
CLOSE position.
Open/Close mark on the top-set.
5
For easy assembly hold the drum lid
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
TIP
Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
●
on
the strainer is aligned with the red dot
●
on the juicing bowl.
1
Note | The juicer will not operate if the down arrow
▼
on the drum lid is not completely aligned
with the CLOSE mark on the body.
Open
Close
6
ROYAL PRESTIGE®
JUICE EXTRACTOR
98
HOW TO ASSEMBLE
The juicing screw needs to be locked in
place in order to close the drum lid.
Note |
STEP 1
Top-set Assembly
STEP 2
Top-set and Body Assembly
Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
Place the drum lid on to the juicing bowl
aligning the red dot
●
on the drum lid with
the red dot
●
on the juicing bowl. Turn
clockwise to close, aligning the red dot
●
on the drum lid with the close mark .
Check Before
Operating
• Wash the parts before rst use.
• Ensure that the silicone ring is assembled properly.
2
3
4
6
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Place the drum lid on the juicing bowl.
Align the down arrow
▼
on the drum
lid with the
OPEN mark on the body
and turn to the
CLOSE position.
Open/Close mark on the top-set.
5
For easy assembly hold the drum lid
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
TIP
Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
●
on
the strainer is aligned with the red dot
●
on the juicing bowl.
1
Note | The juicer will not operate if the down arrow
▼
on the drum lid is not completely aligned
with the CLOSE mark on the body.
Open
Close