Royal Sovereign ARP-51400HA Troubleshooting Guide

Royal Sovereign ARP-51400HA

14 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ver.1.00

Table of Contents

Other manuals for Royal Sovereign ARP-51400HA

Owner's Manual32 pages

Questions and Answers:

J
Jill OwenAug 3, 2025
What to do if Royal Sovereign Air Conditioner is not cool enough?
- I
  ikrauseAug 3, 2025
  If your Royal Sovereign Air Conditioner isn't cooling sufficiently, several factors could be at play. Ensure that all doors and windows are closed. Remove any heat sources from the room and ensure nothing is obstructing air discharge. Check the exhaust air hose, making sure it's connected and not blocked; clean it if necessary. Also, verify that the air inlet isn't blocked and clean it if needed. Finally, try resetting the temperature to a lower setting. Position the air exhaust hose correctly, keeping it as short and free of curves as possible to avoid bottlenecks.
B
Bailey AriasAug 9, 2025
Why Royal Sovereign Air Conditioner does not start?
- S
  Sheryl RobinsonAug 9, 2025
  If your Royal Sovereign Air Conditioner fails to start when you press the power button, there might be a few reasons. First, check and reset the power plug. Allow 3 minutes before attempting to restart the unit. Another possible cause is that the water tank is full, indicated by a blinking water full indicator lamp; drain the water tank. Also, make sure that the room temperature is not higher than the setting temperature (if in electric heating mode) or lower than the setting temperature (if in cooling mode); if it is, reset the temperature accordingly.
A
Amanda HansenAug 15, 2025
What does E2/E4 mean on my Royal Sovereign ARP-51400HA Air Conditioner?
- L
  lcontrerasAug 16, 2025
  The error code E2/E4 on your Royal Sovereign Air Conditioner indicates that the water tank is full or there is incorrect wiring of plug. To resolve this, drain the water by pulling out the rubber stopper located at the bottom of the unit. Also, verify that the plug has been wired correctly.
J
Julie WestAug 21, 2025
Why is my Royal Sovereign Air Conditioner so noisy?
- D
  Donald MurrayAug 21, 2025
  A noisy Royal Sovereign Air Conditioner can stem from a couple of reasons. First, ensure the unit is placed on a flat, level surface. If the noise persists, it could be due to the normal flowing of refrigerant inside the air conditioner.
R
Richard TaylorAug 27, 2025
What does E0/E3 mean on my Royal Sovereign ARP-51400HA?
- J
  Jeremy MurrayAug 27, 2025
  The error code E0/E3 on your Royal Sovereign Air Conditioner indicates an electrical short on both the temperature sensor and PCB. Contact an electrician for repair.

Royal Sovereign ARP-51400HA Specifications

General

Power Supply	115V / 60Hz
Fan Speeds	3
Digital Display	Yes
Remote Control	Yes
Refrigerant	R410A
Cooling Capacity	14000 BTU
Programmable Timer	Yes
Filter Type	Washable
Window Kit	Yes

Related product manuals

Preview: Royal Sovereign ARP-5010

Royal Sovereign ARP-5010

Preview: Royal Sovereign ARP-912

Royal Sovereign ARP-912

Preview: Royal Sovereign ARP-900E

Royal Sovereign ARP-900E

Preview: Royal Sovereign ARP-2412

Royal Sovereign ARP-2412

Preview: Royal Sovereign ARP-900DE

Royal Sovereign ARP-900DE

Preview: Royal Sovereign ARP-1000ES

Royal Sovereign ARP-1000ES

Preview: Royal Sovereign ARP-9009TL

Royal Sovereign ARP-9009TL

Preview: Royal Sovereign ARP-9407CA

Royal Sovereign ARP-9407CA

Preview: Royal Sovereign ARP-1200DE

Royal Sovereign ARP-1200DE

Preview: Royal Sovereign ARP-8085CA

Royal Sovereign ARP-8085CA

Preview: Royal Sovereign ARP-1400BLS

Royal Sovereign ARP-1400BLS