Need help?Do you have a question about the RS PRO ES-H Series and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Display Type | LCD |
| Type | Bench |
| Readability | 0.1 g, 0.2 g, 0.5 g, 1 g, 2 g, 5 g |
| Power Source | Battery |
| Pan Dimensions | Varies by model |
| Units of Measurement | g, kg, lb, oz |
| Calibration | External |
| Capacity | 3 kg, 6 kg, 15 kg, 30 kg |
| Platform Size | Varies by model |
| Interface | RS-232 |
Explains the balance's load cell, microcomputer, and suitability for labs.
Lists the items included in the box for the ES-H/ES-HA balance.
Instructions for placing, leveling, and preparing the balance for use.
Explains the purpose and operation of each control key on the balance.
Step-by-step guide for performing basic weight measurements.
Instructions for net weighing using the tare function with containers.
How to use the balance for counting items based on a reference sample.
How to use the balance to determine percentage based on a reference weight.
Steps for performing sensitivity calibration using gram weights.
Procedure for linear calibration, recommended for qualified technicians.
General advice for cleaning, unplugging, and storing the balance.
Instructions for replacing the balance's internal batteries.
How to connect the balance to a PC via RS232 for data transmission.
Lists common error codes, their causes, and recommended solutions.
Detailed technical specifications including capacity, resolution, and dimensions.
Statements regarding radio frequency emissions compliance for US and Canada.
Confirmation of compliance with relevant European Union directives.
To Next Page
