Need help?Do you have a question about the RS PRO IDM-8341 Series and is the answer not in the manual?
General| Brand | RS PRO |
|---|---|
| Model | IDM-8341 Series |
| Category | Multimeter |
| Language | English |
Explains safety symbols used in the manual or on the instrument.
Provides general safety guidelines for operating the instrument.
Describes the portable, dual-display digital multimeters.
Lists the items included in the instrument's package.
Details the front panel layout and components of the multimeter.
Guides the user on how to set up the instrument, including tilting the stand.
Outlines the steps to turn on and power up the multimeter.
Defines refresh rate, reading indicator, and triggering modes.
Explains how to measure AC and DC voltages and set ranges.
Details how to measure AC and DC currents and select ranges.
Describes how to perform resistance measurements and select ranges.
Explains how to perform a diode test and interpret results.
Guides on measuring capacitance and selecting ranges.
Explains how to perform continuity tests and set thresholds.
Describes measuring frequency and period, and their settings.
Details how to measure temperature using a thermocouple.
Explains how to view two different measurement results simultaneously.
Introduces advanced measurement functions like dB, dBm, Max/Min, etc.
Explains dBm, dB, and W calculations and measurements.
Describes how to store and view highest/lowest readings.
Explains how to store and display relative measurement values.
Details how to retain and update measurement data based on a threshold.
Explains how to check if data stays within specified limits.
Covers MX+B, 1/X, and Percentage calculations.
Shows how to display the instrument's serial number.
Explains how to view the firmware version number.
Guides on adjusting the display's brightness levels.
Explains how to set input resistance for DC voltage ranges.
Details how to configure input terminals for frequency/period measurements.
Covers setting compatibility modes for emulation.
Explains how to reset the instrument to factory defaults.
Introduces saving measurement results to a USB stick.
Describes the format of data saved to CSV files.
Explains the naming convention for saved files.
Details Simple and Advance modes for USB storage operations.
Explains how to log data for extended periods.
Describes how to check the status of USB storage operations.
Step-by-step guide for simple USB saving.
Step-by-step guide for advanced USB saving.
Provides advice on managing files on the USB stick.
Explains how to set up remote communication interfaces.
Details the USB connection for remote control.
Describes the optional GPIB port for remote control.
Explains how to switch back from remote to local control.
Outlines the basic syntax rules for SCPI commands.
Explains long and short command forms.
Provides a comprehensive list of available commands.
Troubleshooting tips for performance issues.
Explains reasons for discrepancies in voltage readings.
Provides a visual representation of the instrument's menu structure.
Lists the default settings for various instrument parameters.
Step-by-step instructions for replacing the AC fuse.
Step-by-step instructions for replacing the input fuse.
Describes the instrument's status reporting system.
Lists the technical specifications and operating conditions.
Shows the physical dimensions of the instrument.
To Next Page
