5
2.5
2.3
2.4
Take the new base with the mainsheet jammer on it,
align the three pins with the holes and push it down
then forwards to lock into place.
You should hear a click as the catch engages.
Remove the ratchet block and ttings from the base.
Compress the existing spring (as removed in step 2.3 or 1.1)
using cable ties then attach the ratchet block onto the eyelet of
the new swivel base.
Make sure the plastic spring washer goes back
on the right way up.
Once the shackle is tightened, cut the cable ties.
To Previous Page
Loading...
