RTI CB-8 - Product Contents; Installation and Operation; RJ-45 Wiring Standard; RJ-45 Connector Pin Out

Installation & Operation
It’s Under Control
®
Product Contents
Contents within the box include the following items:
• One (1) CB-8 Connecting Block
• One (1) Power Supply
• One (1) Cat 5 Patch Cable
• One (1) Reference guide
CB-8
Connecting Block
Connections
All RJ-45 plugs should be attached to Cat-5/6 cable using the EIA/TIA 568B standard.
RJ-45 Connector Pin Out
Pin # Color Function
1 White with orange stripe RS-485-
2 Solid orange RS-485+
3 White with green stripe Infrared
4 Solid blue +16VDC
5 White with blue stripe +16VDC
6 Solid green Infrared
7 White with brown stripe Ground
8 Solid brown Ground
RJ-45 WIRING STANDARD
12345678
Each CB-8 provides power to the following devices up to the distances listed using IR or
Ethernet for control (if available). For control via RS485, the total wired distance for all
attached devices should be kept under 1000 ft (300m).
KX10s - 2 maximum - Up to 60 feet away.
KX3, KX4, KX7s - 4 maximum - Up to 150 feet away.
KX2, RK1+, RKM-1+ - 8 maximum - Up to 1000 feet away.
Expansion Modules (PCM-8) - 8 maximum - Up to 1000 feet total wired distance to
all modules.
Note: The CB-8 is not compatible with KA8 or KA11 touchpanels.
MAXIMUM NUMBER OF DEVICES AND CABLE DISTANCES
Specications
Power Supply 12 VDC, 4.0A
Maximum Current per
Port
1.5A
Enclosure Formed steel, black power coating
Dimensions
5 in. x 9.4 in. x 1 in.
(127mm x 239mm x 25.4mm)
Mounting Wall-mount or free standing
Weight
24.7 oz.
(700 grams)
All specications are subject to change.
Important Notes
Please read these important notes about the CB-8:
The CB-8 should be placed in an area where it is around normal room temperature
(between 60°F to 90°F).
Avoid installing the CB-8 in a location where it can come in contact with direct
sunlight.
Do not let the CB-8 get wet. It should not be handled with wet hands or placed in an
area where it could get wet.
Do not subject the CB-8 to smoke, dust, or vibrations.
Only use the power supply that is specied for the CB-8. Using the wrong type of
power supply may result in damage.
Do not disassemble the unit. Service of the CB-8 should be performed by authorized
personnel only.
1.72
2.14
6.000
6.39
FRONT PANEL REMOVED
FOR CLARITY
XP-8v Dimensions
REMOTE TECHNOLOGIES INC.
SHAKOPEE, MN 55379
1
42
3
5
6
7
8
1 42 3 5 6 7 8
A B A B
A B
A B A B A B A B A B
1 42 3 5 6 7 8
A B A B
A B
A B A B A B
A B
A B
1
2
3
4
5
6
7
8
INFRARED OUT / SERIAL OUT / POWER SYNC IN
VOLTAGE / CLOSURE 3A @ 30VDC MAX EA. RELAY / 100mA MAX EA. TRIGGER OUTPUT
12VDC
GND
INPUT HIGH OUT
USB
EXPANSION
12VDC,1A
+
MULTI-PURPOSE I/O PORTS
RS-232
+
SENSE INPUTS
RELAY / TRIGGER OUTPUTS
INFRARED
RTI COM
VIDEO OUT
ETHERNET
POWER
PORT 1
PORT 2
PORT 3
PORT 4
PORT 8PORT 7
PORT 5
PORT 6
IR OUTPUT ADJUST
SEL
MENU
EXIT
BACKLIGHT
RESET
USB MEMORY EXP.
SD CARD
PROG.
PORT
Advanced Control Processor
Model XP-8v
Power
Supply
Cat-5/6 Cable / RJ-45 Jacks
Daisy chain together multiple CB-8 units for
connection of more than 8 touchpanels.
Power
Supply
Power
Supply
RTI PCM-4
Port Control Module
REMOTE TECHNOLOGIES INC.
SHAKOPEE, MN 55379
RK-1+ Dimensions
RTI keypad
1
TITLE
SIZE
DO NOT SCALE DRAWING
DET LISTS YES NO
SHT OF
REV
REMOTE TECHNOLOGIES INC.
SHAKOPEE, MN 55379
DOCUMENT NO.PART NO.
11.238”
[285.45mm]
7.920”
[201.17mm]
1.445”
[36.7mm]
1.220”
[30.99mm]
10.204”
[259.18mm]
7.353”
[186.77mm]
KX-10s Dimensions
1
1 1
RTI Touchpanel
XP-8v Processor