RuarkAudio MR1 mk2 - Page 11

EN-11
EN
DA
DE
FR
IT
ES
NL
NO
LITHIUM COIN CELL SAFETY NOTICE. The remote control
contains a lithium coin cell battery which if ingested, may
cause chemical burns. Keep new and used batteries out of
reach of small children. If you think batteries may have been ingested,
seek immediate medical attention. Do not handle leaking or damaged
batteries. Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This device is labelled in accordance with European
Directive 2012/19/EU concerning waste electrical and
electronic equipment. This symbol indicates that the product
or associated batteries should not be disposed of as general
household waste. As with any electrical equipment, please
dispose of it according to local regulations.
CE COMPLIANCE INFORMATION
This product conforms to all EU Directive requirements as applicable
by law. You may obtain a free copy of the Declaration of Conformity by
contacting your dealer, distributor, or Ruark Audio.
Hereby, Ruark Audio, declares that this device complies with the
essential requirements and other relevant provisions of the European
Radio Equipment Directive 2014/53/EU.
You can download the full CE Declaration of Conformity at
www.ruarkaudio.com/doc/MR1mk2doc.pdf
Specifications
MR1 mk2 speakers
• Ruark 75mm neodymium woofers
• Ruark 20mm silk dome tweeters
• 20W Linear amplier
• Audio grade crossover components
• Bluetooth: A2DP, aptX
• Power consumption:
10-12W typical, 28W max,
0.5W standby
• 3.5mm jack aux analogue input
• Toslink optical digital input
• Phono sub-woofer output
• BackPack battery compatible
• Dimensions: 175 x 130 x 140mm
• Weight: 1.3kg (R) 1.1kg (L)
Power supply
• Input power 100 to 240VAC
50-60Hz 1.0A max
• Output power 14VDC 2.0A
Specication and design subject to
modication without notice