What to do if Ruckus Wireless ZoneDirector 1200 has no APs with matching radio type?
If you are experiencing this issue with your Ruckus Wireless Control Unit, place additional wired APs or Mesh APs that use the same radio type near this AP.
What to do if Ruckus Wireless ZoneDirector 1200 is searching for uplinks?
If you are experiencing this issue with your Ruckus Wireless Control Unit, wait 15 minutes to allow the mesh network to stabilize.
How to fix no APs in manual uplink selection for Ruckus Wireless ZoneDirector 1200?
To resolve this issue on your Ruckus Wireless Control Unit, go to the Configure > Access Points page on the ZoneDirector web interface, and then click SmartSelection.
General| Model | ZoneDirector 1200 |
|---|---|
| RAM | 1 GB |
| Compliant Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz, 5 GHz |
| Interface | Ethernet |
| Manageable | Yes |
| Form Factor | Rack-mountable |
| Max Supported APs | 25 |
| Maximum Supported APs | 25 |
| Management Interface | Web-based |
| Ports | 2 x Gigabit Ethernet |
| Power Supply | AC Power |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 °C to 70 °C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Humidity | 5 - 95% (non-condensing) |
Covers the basic installation steps and initial setup procedures for ZoneDirector.
Explains configuring two ZoneDirectors for failover and backup.
Features for protecting the wireless network from threats like DoS attacks.
Defines access control lists (ACLs) and device policies.
Step-by-step instructions for creating a new Wireless Local Area Network.
Describes how to add and approve new access points.
Identifies and manages unauthorized access points.
Users self-activate devices for network access.
Covers generation and delivery of temporary guest access credentials.
Outlines steps for setting up a wireless mesh network using ZoneDirector.
Diagnoses and resolves issues with isolated mesh APs.
Updates administrator credentials.
Details software updates for ZoneDirector and APs.
Backs up and restores ZoneDirector configurations.
To Next Page