1
Owner’s Manual
Advanced
Horizontal
Series
Heat-Exchanger Unit Heaters
This manual covers installations, maintenance, repair and replacement parts.
WARNING!
READ ALL IMPORTANT NOTICES ON PAGE 3.
PLEASE ADHERE TO INSTRUCTIONS PUBLISHED IN THIS MANUAL.
Failure to do so may be dangerous and may void certain provisions of your warranty.
5475.Rev.9.02
Issue Date: April 2015
Printed in Canada
Runeck™ is a key brand of CCI Thermal Technologies Inc.
Copyright © 2015. All rights reserved.
APPROVED LOCATIONS
The Forced Air Heaters are CSA listed,
certified for the following locations:
Class I, Divisions 1 & 2, Groups C & D;
Class II, Division 1 & 2, Groups E, F, & G;
Class III, Division 1 & 2;
Temperature Code T3B 329˚F (165˚C)
(On Applicable Models Only)
For details of hazardous locations with potential for
explosion, refer to the Canadian Electrical Code, Part 1,
Section 18 or National Electrical Code articles 500-516.
To Next Page
Need help?
General
