S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
Parameter Description
default
Name of the default authentication
method list
Parameter
description
list-name Name of the method list available
Command
mode
Line configuration mode.
Usage
guidelines
If the AAA security server is enabled, this command is
used for the logon authentication with the specified method
list.
Examples
The example below shows how to associate method list on
VTY and perform logon authentication with radius.
Ruijie(config)# aaa new-model
Ruijie(config)# aaa authentication login default radius
Ruijie(config)# line vty 0
Ruijie(config-line)# login authentication default
Command Description
aaa new-model
Enable the AAA security service
Related
commands
aaa
authentication
login
Configure the logon authentication
method list
2.1.15 login local
In case the AAA is disabled, to enable local user authentication on the interface,
execute the interface configuration command login local. The no form of this
command is used to delete the line local user authentication.
login local
no login local
Parameter
description
N/A.
Command
mode
Line configuration mode.
To Next Page
Loading...