S2600E/P CLI Reference Guide Chapter 2 Switch Management Configuration
Commands
2.3.7 show version
To view the information of the system, execute the command show version in
the privileged mode.
show clock [slots | devices| module]
Parameter Description
slots
Current slot information of the device.
module
Current module information of the
device.
Parameter
description
devices
Current device information
Command
mode
Privileged mode
Usage
guidelines
This command is used to view current system information,
mainly including the system start time, version information,
device information, serial number ,etc.
Examples
The example below shows the system information.
Ruijie# show clock detail
clock: 2003-3-17 10:27:21
Clock read from calendar when system boot.
Ruijie# show version
System description : Ruijie Dual Stack Multi-Layer
Switch(S3760-24) By Ruijie Network
System start time: 1970-6-14 11:49:53
System uptime: 3:17:1:17
System hardware version: 2.0
System software version: RGOS 10.3.00(4), Release(34679)
System boot version: 10.2.34077
System CTRL version: 10.2.24136
System serial number: 1234942570001
2.3.8 show
web-server
status
This command is used to show the configuration and status of a web server.
show web-server status
Parameter Description
Parameter
description
-
-
To Next Page
Loading...