Ruijie Reyee RG-NBS3200 Series - Grounding the Switch

Ruijie RG-NBS3200 Series Switches Hardware Installation and Reference Guide Product Installation
31
Place the switch on the table, as shown in Figure 3-5.
Figure 3-5 Mounting the Switch on the Table
The device must be installed and operated in the place that can restrict its movement.
3.4 Grounding the Switch
The RG-NBS3200 has a PGND on the back panel. First connect the PGND to the grounding lug of the rack and then
connect the grounding lug to the grounding bar of the equipment room.
Precautions
 Determine the sectional area of the grounding wire according to the possible maximum current, and use cables of
the good conductor.
 Do not use bare wire.