Web-based Configuration Guide System Settings
168
Table 5-2 View Configuration Parameters
Indicates the name of the view.
1-32 characters. Chinese or full width characters are not
allowed.
Indicates the range of OIDs included in the view, which can
be a single OID or a subtree of OIDs.
There are two types of rules: included and excluded rules.
The included rule only allows access to OIDs within the
OID range. Click Add Included Rule to set this type of
view.
Excluded rules allow access to all OIDs except those in
the OID range. Click Add Excluded Rule to configure
this type of view.
To Next Page
Loading...
