Ruijie RG-S2600G-I Series - Page 1119

CLI Reference SEM Configuration Commands
The following example executes the show smart manager policy
pending detailed command.
Key: P - Priority :L - Low, H - High, N - Normal
S - Scheduling mode :A - Active, P -Pending
No. Job Id P S Status Time Of Event Event Type
Policy Name
1 3191 N P pend Wed Nov11 10:28:53 2009 none
Test_1
maxrun 31536000.000
2 3192 N P pend Wed Nov11 10:28:53 2009 none
Test_1
maxrun 31536000.000
3 3193 N P pend Wed Nov11 10:28:54 2009 none
Test_1
maxrun 31536000.000
4 3194 N P pend Wed Nov11 10:28:54 2009 none
Test_1
maxrun 31536000.000
5 3195 N P pend Wed Nov11 10:28:54 2009 none
Test_1
maxrun 31536000.000
show smart manager scheduler
In the privileged EXEC mode, this command shows the operation of SEM scheduler.
show smart manager scheduler thread [detailed]
Parameter
description
Parameter
Description
detailed
(optional) show the detailed information.
Default
configuration
N/A
Command
mode
Privileged EXEC mode
Usage
Guideline
N/A